The Santi BZ200 Undersuit is made of high-class compressed Thinsulate, which absorbs less moisture and retains its insulating ability even in damp conditions. It is good for cold water, and with a suitable base layer, it can be used for long dives in extremely difficult conditions.
The insulating layer in the men's Santi BZ200 Undersuit is made of high-class compressed Thinsulate 200 type. This type of insulation absorbs less than 1% of moisture in relation to its weight, so even in damp conditions, Thinsulate retains its insulating ability. This breathable material guarantees the thermal balance in the body of the diver.
The Santi BZ200 is good for cold water – with a suitable base layer, it can be used for long dives in extremely difficult conditions.
Santi BZ200 Undersuit features
- Three pockets (two pockets on thighs, 1 chest pocket)
- Water-resistant cuffs
- Tapes, which supply air to the dry gloves
- Two-way zip
- Elastic waist shoulder gussets for free movement
- Wide (10cm) elastic ankle bands to prevent the suit rising up
BZ200 additional options
You can also request additional options free of charge. If you wish to add any of the below options, write it in the notes section at check out.
Please note that once the order has been placed with Santi, these options can’t be added, so it’s important that you let us know when ordering.
- Name patch
- P-valve hole (right or left side)
- Heating system adaptive holes
Advanced materials
The outside layer is made of Polyamide, a lightweight but extremely durable and breathable fabric. The smooth and slippery outer shell provides help with getting into your drysuit.
- Thinsulate™ BZ200 Insulation
- Lining micropolar 140g/m2
- Weight 210g/m²,
- Warmth: 1.30 CLO
- Weight: 1.9kg
FREE "Made to Fit" service
Very few divers require a totally made-to-measure suit due to the wide range of standard sizes available from Santi Diving. With this in mind, Santi offers a free-of-charge Made-to-Fit service to any standard Santi Undersuit ordered, sculpting standard suits to a divers' measurements.
With your undersuit order, you can request up to 4 changes (ranging from 2 to 5 cm) to any of the standard size measurements listed under the chest, inner arm, biceps, forearm, waist, hips, inner leg, thigh, calf or body trunk on the Santi size chart.
If you would require more than 4 changes to make your suit perfect, you can add two more changes for a small additional charge.
Would you like to see more products like this? Check out our best selection of dive undersuits that we have for you. Don't miss them!
The Santi BZ200 Undersuit is made of high-class compressed Thinsulate, which absorbs less moisture and retains its insulating ability even in damp conditions. It is good for cold water, and with a suitable base layer, it can be used for long dives in extremely difficult conditions.
The insulating layer in the men's Santi BZ200 Undersuit is made of high-class compressed Thinsulate 200 type. This type of insulation absorbs less than 1% of moisture in relation to its weight, so even in damp conditions, Thinsulate retains its insulating ability. This breathable material guarantees the thermal balance in the body of the diver.
The Santi BZ200 is good for cold water – with a suitable base layer, it can be used for long dives in extremely difficult conditions.
Santi BZ200 Undersuit features
- Three pockets (two pockets on thighs, 1 chest pocket)
- Water-resistant cuffs
- Tapes, which supply air to the dry gloves
- Two-way zip
- Elastic waist shoulder gussets for free movement
- Wide (10cm) elastic ankle bands to prevent the suit rising up
BZ200 additional options
You can also request additional options free of charge. If you wish to add any of the below options, write it in the notes section at check out.
Please note that once the order has been placed with Santi, these options can’t be added, so it’s important that you let us know when ordering.
- Name patch
- P-valve hole (right or left side)
- Heating system adaptive holes
Advanced materials
The outside layer is made of Polyamide, a lightweight but extremely durable and breathable fabric. The smooth and slippery outer shell provides help with getting into your drysuit.
- Thinsulate™ BZ200 Insulation
- Lining micropolar 140g/m2
- Weight 210g/m²,
- Warmth: 1.30 CLO
- Weight: 1.9kg
FREE "Made to Fit" service
Very few divers require a totally made-to-measure suit due to the wide range of standard sizes available from Santi Diving. With this in mind, Santi offers a free-of-charge Made-to-Fit service to any standard Santi Undersuit ordered, sculpting standard suits to a divers' measurements.
With your undersuit order, you can request up to 4 changes (ranging from 2 to 5 cm) to any of the standard size measurements listed under the chest, inner arm, biceps, forearm, waist, hips, inner leg, thigh, calf or body trunk on the Santi size chart.
If you would require more than 4 changes to make your suit perfect, you can add two more changes for a small additional charge.
Would you like to see more products like this? Check out our best selection of dive undersuits that we have for you. Don't miss them!