
Cylinders
Sold Out
MES Aluminium Cylinder with Valve (11 L)
The MES 11.1L (80cf) aluminium cylinders are a great choice of stage cylinder.
Starting off at about a kilo negative underwater when full, the cylinder becomes only almost a kilo positive when e...
Air Gun Cylinder (12 L)
Features:
Faber 300 bar Airgun cylinder
Mono tank boot included
Diam 171 mm
Available in 3, 4, 7 and 12 litres
Includes free fill if picked up in shop
Can not be courier filled
Would you like to ...
Steel Cylinder c/w Rubber Boot & MDE International Valve
15 Litre steel cylinder complete with rubber boot & MDE international valve.
Would you like to see more products like this? Check out our best selection of dive cylinders that we have for...
Aluminium Drysuit Inflation Cylinder (1.5 L)
1.5 litre Aluminium Drysuit Inflation Cylinder, very popular for the deeper dives. Complete with International valve.
Would you like to see more products like this? Check out our best selection...
It work well with
DUX Mounting Straps 1 litre (110 cm)
DUX mounting straps for argon 1L/6cuft. (pair)
For tank with diameter 80-90mm Straps for attaching a small argon tank, used for inflating a dry suit.
Straps are fastened with attached stainless st...
Sopras tek Button Gauge 1st Stage 350 bar/5000psi
Button gauge dual Scale (350 bar/5000 PSI)
1st stage regulators Ideal for stage cylinders.
Would you like to see more products like this? Check out our best selection of cylinder accessories tha...
LOLA - keyless DIN plug 300Bar
Latest version of LOLA DIN plug.Keyless solution!Plug under pressure you release just turning delrin ring on front of the plug.Then you can unscrew plug from valve just with hand.
Sold Out
Analox DiveOx Nitrox Analyser
Features:
Resolution +/- 0.1%
Accuracy
Water resistant
Large digits
Very fast measurement
Lightweight
State of the art electronics
Tank Banger
Making noise under water doesn't get any simpler than this.
Elastic band, made of surgical tubing, is fitted with a hard plastic ball.
Stretch the band over your scuba tank.
To get your buddy's at...
MDE Cylinder Handle
This fantastic ergonomically-designed carry handle. Tough and durable, with a split collar to allow fitting to an existing cylinder without removing the valve.
Moulded grip for easy carrying.
Will ...
Sold Out
Beaver Female DIN Regulator Dust Cap
Durable nylon polymer Cover Cap, which will provide a high level of protection against damage caused by scrapes, scratches and dents to SCUBA Diving Regulator 1st Stages fitted with an EN-144-1 typ...
Divesloft Silcencer
Divesoft silencers for diving bottles
The silencer is intended for discharging gas from diving tanks. Anyone who has had to discharge old, leftover breathing mix knows what a problem it is to k...
Beaver Heavy Duty Cylinder Mesh
Cylinder mesh provides protection to your cylinder from the knocks and scrapes that happen during every excursion.
Strong Protective Heavy duty PVC mesh sleeve that is custom designed to prevent sc...
Beaver 300 Bar DIN Personal Air Filter
Used to filter air between compressor & cylinder, fitted with 300 Bar DIN type attachments, maintained using our PAF KIT
– Personal Air Filter Service Kit.
Reduces possible cylinder con...
DUX Valve Rubber Knob (Sherwood design)
DUX valve rubber knob with stainless-steel insert.Indestructible valve rubber knob in Sherwood design. Fits most valves.Material: rubber, stainless steel
Beaver 7/16th UNF 90degree First Stage Elbow
The Beaver 1st Stage 90 Degree HP Hose Adapter 7/16" UNF, 90 degree angled High Pressure Hose Adaptor with 7/16" UNF male and female threads. Designed to provide a right angle turn for high pressu...
Sold Out
Blind Plug with Bleed Screw (300 bar)
Blind-End Plug 300Bar with Pressure Release Screw.
The little necessity, which can save your dive.
No more gas leaks during the tanks transport. To unpressure you just unscrew pressure release ...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device