LIGHT AND COMPACT
The LED STINGRAY VIDEO MARK II is an all-around, compact, and powerful dive light.
It weighs only 137g (210g with the battery) and is just 12cm long!
INCREDIBLE AMOUNT OF LIGHT
In the LED STINGRAY VIDEO MARK II, three high-performance next-generation CREE LEDs are utilized. Due to this—and thanks to the advanced electronics implemented—the torch emits a maximum light output of 1300 lumens in a cool white color temperature.
The light is evenly distributed in a wide beam angle of over 120 degrees.
LONG OPERATING TIME
The STINGRAY MARK II LED torch is powered by a 21700 Li-Ion battery, providing a long runtime of about 2 hours. It is characterized by an extended lifespan of up to 500 charging cycles, retaining up to 75% capacity, and offers a high level of safety.
Thanks to the built-in PCM, the battery is protected against overcharging, over-discharge, and short-circuiting.
CHARGING STATUS AND CONVENIENCE OF USE
The battery is equipped with a highly convenient charging system that utilizes the built-in USB-C port. The LED STINGRAY VIDEO MARK II set includes two rechargeable 21700 Li-Ion batteries and a USB-C cable, which can be used to charge the batteries from any power source, such as a charger, power bank, laptop, computer, or car USB charger.
The batteries can also be charged using chargers designed specifically for standard 21700 Li-Ion batteries.
Additionally, a built-in bi-color LED located at the positive terminal of these batteries informs the user about the current charging status: red indicates that the battery is charging, while blue signifies that it is fully charged. Due to the absence of a memory effect, the batteries can be recharged at any time without negatively impacting their capacity or lifespan.
DURABLE AND RELIABLE
The body of the torch is made from a lightweight yet extremely rigid and mechanically durable polymer (polyacetal, POM). This material is highly resistant to environmental factors, including highly saline water, UV radiation, and high temperatures.
The head is precisely molded from a single piece of aluminum alloy. The alloy used is resistant to corrosion in seawater.
The LED STINGRAY VIDEO MARK II is protected by 6mm of tempered glass that is resistant to scratches and mechanical damage.
HARD ANODISED ALUMINIUM BODY
Furthermore, the aluminum head of the LED STINGRAY VIDEO MARK II is covered with a protective layer of hard anodizing. Compared to conventional coatings, the hard anodizing layer is much thicker and provides exceptionally high resistance to mechanical damage (such as scratching or abrasion), as well as additional protection against corrosion.
All markings and descriptions on the torch are laser-engraved, ensuring they remain durable, easy to read, and aesthetically pleasing, regardless of how long the torch is used.
The LED STINGRAY MARK II is designed to ensure safe usage at depths of up to 200 meters.
FLEXIBLE ARMS
The flexible arms feature a lightweight, durable, and modular construction, allowing you to easily extend their reach by adding additional corals to better suit your needs.
| light output | up to 1300 lm |
|---|---|
| total power | 10 W |
| material | alumminium alloy – hard anodised /DELRIN® |
| spot angle | 120º |
| colour temperature | cool white |
| front glass | 6 mm tempered |
| power source | 1 x 21700 protected rechargeable cell with USB type-C charging port |
| switch type | by tightening on/off |
| max. operation depth | 200 m |
| light source |
3 × high efficiency CREE LED |
LIGHT AND COMPACT
The LED STINGRAY VIDEO MARK II is an all-around, compact, and powerful dive light.
It weighs only 137g (210g with the battery) and is just 12cm long!
INCREDIBLE AMOUNT OF LIGHT
In the LED STINGRAY VIDEO MARK II, three high-performance next-generation CREE LEDs are utilized. Due to this—and thanks to the advanced electronics implemented—the torch emits a maximum light output of 1300 lumens in a cool white color temperature.
The light is evenly distributed in a wide beam angle of over 120 degrees.
LONG OPERATING TIME
The STINGRAY MARK II LED torch is powered by a 21700 Li-Ion battery, providing a long runtime of about 2 hours. It is characterized by an extended lifespan of up to 500 charging cycles, retaining up to 75% capacity, and offers a high level of safety.
Thanks to the built-in PCM, the battery is protected against overcharging, over-discharge, and short-circuiting.
CHARGING STATUS AND CONVENIENCE OF USE
The battery is equipped with a highly convenient charging system that utilizes the built-in USB-C port. The LED STINGRAY VIDEO MARK II set includes two rechargeable 21700 Li-Ion batteries and a USB-C cable, which can be used to charge the batteries from any power source, such as a charger, power bank, laptop, computer, or car USB charger.
The batteries can also be charged using chargers designed specifically for standard 21700 Li-Ion batteries.
Additionally, a built-in bi-color LED located at the positive terminal of these batteries informs the user about the current charging status: red indicates that the battery is charging, while blue signifies that it is fully charged. Due to the absence of a memory effect, the batteries can be recharged at any time without negatively impacting their capacity or lifespan.
DURABLE AND RELIABLE
The body of the torch is made from a lightweight yet extremely rigid and mechanically durable polymer (polyacetal, POM). This material is highly resistant to environmental factors, including highly saline water, UV radiation, and high temperatures.
The head is precisely molded from a single piece of aluminum alloy. The alloy used is resistant to corrosion in seawater.
The LED STINGRAY VIDEO MARK II is protected by 6mm of tempered glass that is resistant to scratches and mechanical damage.
HARD ANODISED ALUMINIUM BODY
Furthermore, the aluminum head of the LED STINGRAY VIDEO MARK II is covered with a protective layer of hard anodizing. Compared to conventional coatings, the hard anodizing layer is much thicker and provides exceptionally high resistance to mechanical damage (such as scratching or abrasion), as well as additional protection against corrosion.
All markings and descriptions on the torch are laser-engraved, ensuring they remain durable, easy to read, and aesthetically pleasing, regardless of how long the torch is used.
The LED STINGRAY MARK II is designed to ensure safe usage at depths of up to 200 meters.
FLEXIBLE ARMS
The flexible arms feature a lightweight, durable, and modular construction, allowing you to easily extend their reach by adding additional corals to better suit your needs.
| light output | up to 1300 lm |
|---|---|
| total power | 10 W |
| material | alumminium alloy – hard anodised /DELRIN® |
| spot angle | 120º |
| colour temperature | cool white |
| front glass | 6 mm tempered |
| power source | 1 x 21700 protected rechargeable cell with USB type-C charging port |
| switch type | by tightening on/off |
| max. operation depth | 200 m |
| light source |
3 × high efficiency CREE LED |